var section_tree = new CreateArray(9);
section_tree[1].sName = "Special Offers ";
section_tree[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Special_Offers.html&NOLOGIN=1";
section_tree[1].sImage = "sec_specoffer.jpg";
section_tree[1].nSectionId = "306";
section_tree[1].nImageWidth = "233";
section_tree[1].nImageHeight = "121";
section_tree[1].pChild= new CreateArray(1);
section_tree[1].pChild[1].sName = "Special Offers Selection";
section_tree[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Special_Offers_Select.html&NOLOGIN=1";
section_tree[1].pChild[1].sImage = "sec_specialoffer.jpg";
section_tree[1].pChild[1].nSectionId = "307";
section_tree[1].pChild[1].nImageWidth = "287";
section_tree[1].pChild[1].nImageHeight = "149";
section_tree[1].pChild[1].pChild= new CreateArray(13);
section_tree[1].pChild[1].pChild[1].sName = "Dremel 9100 Fortiflex";
section_tree[1].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_copy_of_Dremel_9100_Fortiflex.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[1].sImage = "1-9100so.gif";
section_tree[1].pChild[1].pChild[1].nSectionId = "21";
section_tree[1].pChild[1].pChild[1].nImageWidth = "226";
section_tree[1].pChild[1].pChild[1].nImageHeight = "158";
section_tree[1].pChild[1].pChild[2].sName = "140 Piece Accessory Set";
section_tree[1].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=140_Piece_Accessory_Set.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[2].sImage = "700ja_so.jpg";
section_tree[1].pChild[1].pChild[2].nSectionId = "88";
section_tree[1].pChild[1].pChild[2].nImageWidth = "226";
section_tree[1].pChild[1].pChild[2].nImageHeight = "158";
section_tree[1].pChild[1].pChild[3].sName = "300 Hobby Table Kit";
section_tree[1].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Xmas_Hobby_Table.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[3].sImage = "s-hobbytable.jpg";
section_tree[1].pChild[1].pChild[3].nSectionId = "47";
section_tree[1].pChild[1].pChild[3].nImageWidth = "226";
section_tree[1].pChild[1].pChild[3].nImageHeight = "156";
section_tree[1].pChild[1].pChild[4].sName = "300 Tool in a Tube";
section_tree[1].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=300_Tool_in_a_Tube.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[4].sImage = "s-300tube.jpg";
section_tree[1].pChild[1].pChild[4].nSectionId = "62";
section_tree[1].pChild[1].pChild[4].nImageWidth = "226";
section_tree[1].pChild[1].pChild[4].nImageHeight = "156";
section_tree[1].pChild[1].pChild[5].sName = "300 Series Machine + 568 Grout Removal Kit";
section_tree[1].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=300_568.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[5].sImage = "sec-300_568.jpg";
section_tree[1].pChild[1].pChild[5].nSectionId = "332";
section_tree[1].pChild[1].pChild[5].nImageWidth = "160";
section_tree[1].pChild[1].pChild[5].nImageHeight = "158";
section_tree[1].pChild[1].pChild[6].sName = "300 Series Machine Only";
section_tree[1].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=300_Series_Machine_Only.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[6].sImage = "sec_300_only.jpg";
section_tree[1].pChild[1].pChild[6].nSectionId = "327";
section_tree[1].pChild[1].pChild[6].nImageWidth = "168";
section_tree[1].pChild[1].pChild[6].nImageHeight = "158";
section_tree[1].pChild[1].pChild[7].sName = "300 Series + 25 Accs + Speed Clic Set";
section_tree[1].pChild[1].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=300_Series___Free_Speed_Clic.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[7].sImage = "s-300_sec.JPG";
section_tree[1].pChild[1].pChild[7].nSectionId = "318";
section_tree[1].pChild[1].pChild[7].nImageWidth = "168";
section_tree[1].pChild[1].pChild[7].nImageHeight = "158";
section_tree[1].pChild[1].pChild[8].sName = "400/80 + Dia. Wheel + Speed Clic Set";
section_tree[1].pChild[1].pChild[8].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=400_80___Dia._Wheel___Speedclic.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[8].sImage = "S-400JE.JPG";
section_tree[1].pChild[1].pChild[8].nSectionId = "329";
section_tree[1].pChild[1].pChild[8].nImageWidth = "160";
section_tree[1].pChild[1].pChild[8].nImageHeight = "157";
section_tree[1].pChild[1].pChild[9].sName = "Dremel 8000 Cordless - 2 Batteries";
section_tree[1].pChild[1].pChild[9].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Dremel_Lithium_Ion_8000.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[9].sImage = "s-80002b.gif";
section_tree[1].pChild[1].pChild[9].nSectionId = "86";
section_tree[1].pChild[1].pChild[9].nImageWidth = "220";
section_tree[1].pChild[1].pChild[9].nImageHeight = "158";
section_tree[1].pChild[1].pChild[10].sName = "100 Piece Accessory Set";
section_tree[1].pChild[1].pChild[10].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=100_Piece_Accessory_Set.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[10].sImage = "sec_701.jpg";
section_tree[1].pChild[1].pChild[10].nSectionId = "328";
section_tree[1].pChild[1].pChild[10].nImageWidth = "160";
section_tree[1].pChild[1].pChild[10].nImageHeight = "158";
section_tree[1].pChild[1].pChild[11].sName = "200 Piece Accessory Set";
section_tree[1].pChild[1].pChild[11].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=704JA_200_Piece_Accessory_Set.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[11].sImage = "sec_704JA.jpg";
section_tree[1].pChild[1].pChild[11].nSectionId = "317";
section_tree[1].pChild[1].pChild[11].nImageWidth = "119";
section_tree[1].pChild[1].pChild[11].nImageHeight = "158";
section_tree[1].pChild[1].pChild[12].sName = "Hobby Engraving Kit";
section_tree[1].pChild[1].pChild[12].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Hobby_Engraving_Kit.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[12].sImage = "s-290jk.jpg";
section_tree[1].pChild[1].pChild[12].nSectionId = "74";
section_tree[1].pChild[1].pChild[12].nImageWidth = "229";
section_tree[1].pChild[1].pChild[12].nImageHeight = "158";
section_tree[1].pChild[1].pChild[13].sName = "Glitter Glue Gun";
section_tree[1].pChild[1].pChild[13].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Glitter_Glue_Gun.html&NOLOGIN=1";
section_tree[1].pChild[1].pChild[13].sImage = "sec_1200kb.jpg";
section_tree[1].pChild[1].pChild[13].nSectionId = "75";
section_tree[1].pChild[1].pChild[13].nImageWidth = "229";
section_tree[1].pChild[1].pChild[13].nImageHeight = "158";
section_tree[2].sName = "Dremel Tools";
section_tree[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Tools.html&NOLOGIN=1";
section_tree[2].sImage = "tool_sec_new.jpg";
section_tree[2].nSectionId = "97";
section_tree[2].nImageWidth = "175";
section_tree[2].nImageHeight = "121";
section_tree[2].pChild= new CreateArray(2);
section_tree[2].pChild[1].sName = "Dremel Tool Range";
section_tree[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Tool.html&NOLOGIN=1";
section_tree[2].pChild[1].sImage = "S-Dremel_tools.jpg";
section_tree[2].pChild[1].nSectionId = "2";
section_tree[2].pChild[1].nImageWidth = "343";
section_tree[2].pChild[1].nImageHeight = "206";
section_tree[2].pChild[1].pChild= new CreateArray(10);
section_tree[2].pChild[1].pChild[1].sName = "Dremel 9100 Fortiflex";
section_tree[2].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_9100_Fortiflex.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[1].sImage = "1-9100.gif";
section_tree[2].pChild[1].pChild[1].nSectionId = "13";
section_tree[2].pChild[1].pChild[1].nImageWidth = "271";
section_tree[2].pChild[1].pChild[1].nImageHeight = "150";
section_tree[2].pChild[1].pChild[2].sName = "Dremel 4000 Series";
section_tree[2].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=DREMEL_4000_SERIES.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[2].sImage = "1-4000sec.gif";
section_tree[2].pChild[1].pChild[2].nSectionId = "80";
section_tree[2].pChild[1].pChild[2].nImageWidth = "270";
section_tree[2].pChild[1].pChild[2].nImageHeight = "150";
section_tree[2].pChild[1].pChild[2].pChild= new CreateArray(2);
section_tree[2].pChild[1].pChild[2].pChild[1].sName = "4000 Series + 45 Accessories";
section_tree[2].pChild[1].pChild[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=4000_Series___45_Accessories.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[2].pChild[1].sImage = "s-4000jb.jpg";
section_tree[2].pChild[1].pChild[2].pChild[1].nSectionId = "81";
section_tree[2].pChild[1].pChild[2].pChild[1].nImageWidth = "168";
section_tree[2].pChild[1].pChild[2].pChild[1].nImageHeight = "158";
section_tree[2].pChild[1].pChild[2].pChild[2].sName = "4000 Series + 65 Accessories";
section_tree[2].pChild[1].pChild[2].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=4000_Series___65_Accessories.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[2].pChild[2].sImage = "s-4000je.jpg";
section_tree[2].pChild[1].pChild[2].pChild[2].nSectionId = "82";
section_tree[2].pChild[1].pChild[2].pChild[2].nImageWidth = "168";
section_tree[2].pChild[1].pChild[2].pChild[2].nImageHeight = "158";
section_tree[2].pChild[1].pChild[3].sName = "Dremel Driver 7.2v";
section_tree[2].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Driver_7.2v.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[3].sImage = "1-1120.gif";
section_tree[2].pChild[1].pChild[3].nSectionId = "343";
section_tree[2].pChild[1].pChild[3].nImageWidth = "271";
section_tree[2].pChild[1].pChild[3].nImageHeight = "150";
section_tree[2].pChild[1].pChild[4].sName = "Dremel Stylus Lithium-Ion";
section_tree[2].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Cordless_.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[4].sImage = "1-002a.gif";
section_tree[2].pChild[1].pChild[4].nSectionId = "275";
section_tree[2].pChild[1].pChild[4].nImageWidth = "271";
section_tree[2].pChild[1].pChild[4].nImageHeight = "150";
section_tree[2].pChild[1].pChild[5].sName = "Dremel Glue Gun";
section_tree[2].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Glue_Gun.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[5].sImage = "1-1200JBa.gif";
section_tree[2].pChild[1].pChild[5].nSectionId = "273";
section_tree[2].pChild[1].pChild[5].nImageWidth = "271";
section_tree[2].pChild[1].pChild[5].nImageHeight = "150";
section_tree[2].pChild[1].pChild[6].sName = "Dremel 300 Series";
section_tree[2].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Dremel_3981.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[6].sImage = "s-300_new06a.JPG";
section_tree[2].pChild[1].pChild[6].nSectionId = "263";
section_tree[2].pChild[1].pChild[6].nImageWidth = "271";
section_tree[2].pChild[1].pChild[6].nImageHeight = "150";
section_tree[2].pChild[1].pChild[6].pChild= new CreateArray(2);
section_tree[2].pChild[1].pChild[6].pChild[1].sName = "300 Series + 55 Accessories and Case";
section_tree[2].pChild[1].pChild[6].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=300_Series___55_Accessories_and_Case.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[6].pChild[1].sImage = "s-300_55_sec.JPG";
section_tree[2].pChild[1].pChild[6].pChild[1].nSectionId = "265";
section_tree[2].pChild[1].pChild[6].pChild[1].nImageWidth = "160";
section_tree[2].pChild[1].pChild[6].pChild[1].nImageHeight = "158";
section_tree[2].pChild[1].pChild[6].pChild[2].sName = "300 Series + 30 Accessories with Soft Case";
section_tree[2].pChild[1].pChild[6].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=300_Series___25_Accessories_and_Case.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[6].pChild[2].sImage = "s-30030.jpg";
section_tree[2].pChild[1].pChild[6].pChild[2].nSectionId = "266";
section_tree[2].pChild[1].pChild[6].pChild[2].nImageWidth = "168";
section_tree[2].pChild[1].pChild[6].pChild[2].nImageHeight = "158";
section_tree[2].pChild[1].pChild[7].sName = "Dremel Lithium-Ion 8000";
section_tree[2].pChild[1].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Lithium_Ion_8000.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[7].sImage = "s-800_new06.JPG";
section_tree[2].pChild[1].pChild[7].nSectionId = "101";
section_tree[2].pChild[1].pChild[7].nImageWidth = "271";
section_tree[2].pChild[1].pChild[7].nImageHeight = "150";
section_tree[2].pChild[1].pChild[8].sName = "Dremel Engraver";
section_tree[2].pChild[1].pChild[8].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Engraver.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[8].sImage = "1-003.gif";
section_tree[2].pChild[1].pChild[8].nSectionId = "288";
section_tree[2].pChild[1].pChild[8].nImageWidth = "271";
section_tree[2].pChild[1].pChild[8].nImageHeight = "150";
section_tree[2].pChild[1].pChild[9].sName = "Dremel Versatip ";
section_tree[2].pChild[1].pChild[9].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Multitip_.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[9].sImage = "1-MultiTip.gif";
section_tree[2].pChild[1].pChild[9].nSectionId = "314";
section_tree[2].pChild[1].pChild[9].nImageWidth = "271";
section_tree[2].pChild[1].pChild[9].nImageHeight = "150";
section_tree[2].pChild[1].pChild[10].sName = "Dremel VersaFlame";
section_tree[2].pChild[1].pChild[10].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_VersaFlame.html&NOLOGIN=1";
section_tree[2].pChild[1].pChild[10].sImage = "s-versa.jpg";
section_tree[2].pChild[1].pChild[10].nSectionId = "330";
section_tree[2].pChild[1].pChild[10].nImageWidth = "271";
section_tree[2].pChild[1].pChild[10].nImageHeight = "150";
section_tree[2].pChild[2].sName = "Dremel Hobby Range";
section_tree[2].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Hobby_Range.html&NOLOGIN=1";
section_tree[2].pChild[2].sImage = "sec_hobby.jpg";
section_tree[2].pChild[2].nSectionId = "73";
section_tree[2].pChild[2].nImageWidth = "343";
section_tree[2].pChild[2].nImageHeight = "207";
section_tree[2].pChild[2].pChild= new CreateArray(6);
section_tree[2].pChild[2].pChild[1].sName = "Hobby Engraving Kit";
section_tree[2].pChild[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Hobby_Engraving_Kit.html&NOLOGIN=1";
section_tree[2].pChild[2].pChild[1].sImage = "s-290jk.jpg";
section_tree[2].pChild[2].pChild[1].nSectionId = "72";
section_tree[2].pChild[2].pChild[1].nImageWidth = "229";
section_tree[2].pChild[2].pChild[1].nImageHeight = "158";
section_tree[2].pChild[2].pChild[2].sName = "Glitter Glue Gun";
section_tree[2].pChild[2].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Glitter_Glue_Gun.html&NOLOGIN=1";
section_tree[2].pChild[2].pChild[2].sImage = "sec_1200kb.jpg";
section_tree[2].pChild[2].pChild[2].nSectionId = "347";
section_tree[2].pChild[2].pChild[2].nImageWidth = "229";
section_tree[2].pChild[2].pChild[2].nImageHeight = "158";
section_tree[2].pChild[2].pChild[3].sName = "Hobby Stylus";
section_tree[2].pChild[2].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Hobby_Stylus.html&NOLOGIN=1";
section_tree[2].pChild[2].pChild[3].sImage = "sec_hstylus.jpg";
section_tree[2].pChild[2].pChild[3].nSectionId = "76";
section_tree[2].pChild[2].pChild[3].nImageWidth = "160";
section_tree[2].pChild[2].pChild[3].nImageHeight = "158";
section_tree[2].pChild[2].pChild[4].sName = "Versatip";
section_tree[2].pChild[2].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Versatip.html&NOLOGIN=1";
section_tree[2].pChild[2].pChild[4].sImage = "sec_hversa.jpg";
section_tree[2].pChild[2].pChild[4].nSectionId = "77";
section_tree[2].pChild[2].pChild[4].nImageWidth = "130";
section_tree[2].pChild[2].pChild[4].nImageHeight = "158";
section_tree[2].pChild[2].pChild[5].sName = "Hobby Project Table";
section_tree[2].pChild[2].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Hobby_Project_Table.html&NOLOGIN=1";
section_tree[2].pChild[2].pChild[5].sImage = "sec_hproject.jpg";
section_tree[2].pChild[2].pChild[5].nSectionId = "78";
section_tree[2].pChild[2].pChild[5].nImageWidth = "191";
section_tree[2].pChild[2].pChild[5].nImageHeight = "158";
section_tree[2].pChild[2].pChild[6].sName = "Hobby 300 Series";
section_tree[2].pChild[2].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Hobby_300_Series.html&NOLOGIN=1";
section_tree[2].pChild[2].pChild[6].sImage = "sec_h300.jpg";
section_tree[2].pChild[2].pChild[6].nSectionId = "79";
section_tree[2].pChild[2].pChild[6].nImageWidth = "215";
section_tree[2].pChild[2].pChild[6].nImageHeight = "158";
section_tree[3].sName = "Dremel Accessories";
section_tree[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=ACCESSORIES.html&NOLOGIN=1";
section_tree[3].sImage = "access_sec_new.jpg";
section_tree[3].nSectionId = "98";
section_tree[3].nImageWidth = "175";
section_tree[3].nImageHeight = "121";
section_tree[3].pChild= new CreateArray(1);
section_tree[3].pChild[1].sName = "Bits & Accessories";
section_tree[3].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Accessory.html&NOLOGIN=1";
section_tree[3].pChild[1].sImage = "S-Dremel_accessories.jpg";
section_tree[3].pChild[1].nSectionId = "1";
section_tree[3].pChild[1].nImageWidth = "350";
section_tree[3].pChild[1].nImageHeight = "233";
section_tree[3].pChild[1].pChild= new CreateArray(3);
section_tree[3].pChild[1].pChild[1].sName = "Dremel Rotary Tool Bits";
section_tree[3].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Rotary_Tool_Bits.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].sImage = "S-Rotary_bits_150.JPG";
section_tree[3].pChild[1].pChild[1].nSectionId = "9";
section_tree[3].pChild[1].pChild[1].nImageWidth = "220";
section_tree[3].pChild[1].pChild[1].nImageHeight = "131";
section_tree[3].pChild[1].pChild[1].pChild= new CreateArray(8);
section_tree[3].pChild[1].pChild[1].pChild[1].sName = "1. Carving / Engraving / Routing";
section_tree[3].pChild[1].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Carving_Engraving_Routing.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].sImage = "1-carving.JPG";
section_tree[3].pChild[1].pChild[1].pChild[1].nSectionId = "51";
section_tree[3].pChild[1].pChild[1].pChild[1].nImageWidth = "143";
section_tree[3].pChild[1].pChild[1].pChild[1].nImageHeight = "143";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild= new CreateArray(6);
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].sName = "1. High Speed Cutters 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=High_Speed_Cutters.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].sImage = "1-highsp.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].nSectionId = "63";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild= new CreateArray(12);
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[1].sName = "114 7.8 mm High Speed Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=114_7_8_mm_High_Speed_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[1].sImage = "1-114.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[1].nSectionId = "133";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[2].sName = "115 7.8 mm High Speed Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=115_7_8_mm_High_Speed_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[2].sImage = "1-115.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[2].nSectionId = "134";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[3].sName = "117 6.4 mm High Speed Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=117_6_4_mm_High_Speed_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[3].sImage = "1-117.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[3].nSectionId = "135";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[4].sName = "118 3.2 mm High Speed Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=118_3_2_mm_High_Speed_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[4].sImage = "1-118.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[4].nSectionId = "136";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[5].sName = "125 6.4 mm High Speed Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=125_6_4_mm_High_Speed_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[5].sImage = "1-125.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[5].nSectionId = "137";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[6].sName = "134 6.4 mm High Speed Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=134_6_4_mm_High_Speed_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[6].sImage = "1-134.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[6].nSectionId = "138";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[7].sName = "144 7.8 mm High Speed Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=144_7_8_mm_High_Speed_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[7].sImage = "1-144.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[7].nSectionId = "139";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[7].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[7].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[8].sName = "192 4.8 mm High Speed Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[8].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=192_4_8_mm_High_Speed_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[8].sImage = "1-192.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[8].nSectionId = "140";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[8].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[8].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[9].sName = "193 2.0 mm High Speed Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[9].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=193_2_0_mm_High_Speed_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[9].sImage = "1-193.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[9].nSectionId = "141";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[9].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[9].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[10].sName = "194 3.2 mm High Speed Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[10].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=194_3_2_mm_High_Speed_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[10].sImage = "1-194.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[10].nSectionId = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[10].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[10].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[11].sName = "196 5.6 mm High Speed Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[11].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=196_5_6_mm_High_Speed_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[11].sImage = "1-196.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[11].nSectionId = "143";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[11].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[11].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[12].sName = "199 9.5 mm High Speed Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[12].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=199_9_5_mm_High_Speed_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[12].sImage = "1-199.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[12].nSectionId = "144";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[12].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[1].pChild[12].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].sName = "2. Engraving Cutters 2.4 mm";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Engraving_Cutters.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].sImage = "1-engrave.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].nSectionId = "70";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild= new CreateArray(7);
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[1].sName = "105 0.8 mm Engraver";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=105_0_8_mm_Engraver.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[1].sImage = "1-105.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[1].nSectionId = "145";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[2].sName = "106 1.6 mm Engraver";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=106_1_6_mm_Engraver.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[2].sImage = "1-106.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[2].nSectionId = "146";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[3].sName = "107 2.4 mm Engraver";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=107_2_4_mm_Engraver.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[3].sImage = "1-107.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[3].nSectionId = "147";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[4].sName = "108 0.8 mm Engraver";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=108_0_8_mm_Engraver.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[4].sImage = "1-108.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[4].nSectionId = "148";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[5].sName = "110 1.9 mm Engraver";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=110_1_9_mm_Engraver.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[5].sImage = "1-110.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[5].nSectionId = "149";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[6].sName = "111 0.8 mm Engraver";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=111_0_8_mm_Engraver.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[6].sImage = "1-111.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[6].nSectionId = "150";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[7].sName = "113 1.6 mm Engraver";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=113_1_6_mm_Engraver.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[7].sImage = "1-113.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[7].nSectionId = "151";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[7].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[2].pChild[7].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].sName = "3. Diamond Wheel Points 2.4 mm";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Diamond_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].sImage = "1-diamond.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].nSectionId = "65";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild= new CreateArray(7);
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[1].sName = "7103 2.0 mm Diamond Wheel Point";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=7103_2_0_mm_Diamond_Wheel_Point.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[1].sImage = "1-7103.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[1].nSectionId = "153";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[2].sName = "7105 4.4 mm Diamond Wheel Point";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=7105_4_4_mm_Diamond_Wheel_Point.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[2].sImage = "1-7105.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[2].nSectionId = "154";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[3].sName = "7120 6.7 mm Diamond Wheel Point";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=7120_6_7_mm_Diamond_Wheel_Point.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[3].sImage = "1-7120.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[3].nSectionId = "155";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[4].sName = "7122 2.4 mm Diamond Wheel Point";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=7122_2_4_mm_Diamond_Wheel_Point.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[4].sImage = "1-7122.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[4].nSectionId = "156";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[5].sName = "7123 4.8 mm Diamond Wheel Point";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=7123_4_8_mm_Diamond_Wheel_Point.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[5].sImage = "1-7123.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[5].nSectionId = "157";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[6].sName = "7134 2.0 mm Diamond Wheel Point";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=7134_2_0_mm_Diamond_Wheel_Point.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[6].sImage = "1-7134.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[6].nSectionId = "158";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[7].sName = "7144 2.4 mm Diamond Wheel Point";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=7144_2_4_mm_Diamond_Wheel_Point.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[7].sImage = "1-7144.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[7].nSectionId = "159";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[7].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[3].pChild[7].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].sName = "4. Tungsten Carbide Cutters 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Tungsten_Carbide_Cutters.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].sImage = "1-tungst.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].nSectionId = "67";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild= new CreateArray(8);
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[1].sName = "9901 3.2 mm Tungsten Carbide Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=9901_3_2_mm_Tungsten_Carbide_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[1].sImage = "1-9901.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[1].nSectionId = "160";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[2].sName = "9902 2.4 mm Tungsten Carbide Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=9902_2_4_mm_Tungsten_Carbide_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[2].sImage = "1-9902.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[2].nSectionId = "161";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[3].sName = "9903 3.2 mm Tungsten Carbide Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=9903_3_2_mm_Tungsten_Carbide_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[3].sImage = "1-9903.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[3].nSectionId = "162";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[4].sName = "9904 2.4 mm Tungsten Carbide Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=9904_2_4_mm_Tungsten_Carbide_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[4].sImage = "1-9904.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[4].nSectionId = "163";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[5].sName = "9905 3.2 mm Tungsten Carbide Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=9905_3_2_mm_Tungsten_Carbide_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[5].sImage = "1-9905.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[5].nSectionId = "164";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[6].sName = "9909 3.2 mm Tungsten Carbide Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=9909_3_2_mm_Tungsten_Carbide_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[6].sImage = "1-9909.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[6].nSectionId = "165";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[7].sName = "9910 3.2 mm Tungsten Carbide Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=9910_3_2_mm_Tungsten_Carbide_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[7].sImage = "1-9910.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[7].nSectionId = "166";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[7].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[7].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[8].sName = "9911 3.2 mm Tungsten Carbide Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[8].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=9911_3_2_mm_Tungsten_Carbide_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[8].sImage = "1-9911.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[8].nSectionId = "167";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[8].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[4].pChild[8].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].sName = "5. Structured Tooth Tungsten Carbide Cutters 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Structured_Tooth.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].sImage = "1-struct.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].nSectionId = "69";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild= new CreateArray(2);
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild[1].sName = "9931 6.4 mm Tungsten Carbide Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=9931_6_4_mm_Tungsten_Carbide_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild[1].sImage = "1-9931.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild[1].nSectionId = "168";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild[2].sName = "9934 7.8 mm Tungsten Carbide Cutter";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=9934_7_8_mm_Tungsten_Carbide_Cutter.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild[2].sImage = "1-9934.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild[2].nSectionId = "170";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[5].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].sName = "6. Router Bits (HSS) 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=High_Speed_Router.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].sImage = "1-router.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].nSectionId = "64";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild= new CreateArray(7);
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[1].sName = "612 2.8 mm Piloted Beading Bit";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=612_2_8_mm_Piloted_Beading_Bit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[1].sImage = "1-612.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[1].nSectionId = "172";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[2].sName = "615 3.2 mm Corner Rounding Bit";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=615_3_2_mm_Corner_Rounding_Bit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[2].sImage = "1-615.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[2].nSectionId = "173";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[3].sName = "640 6.4 mm V-Groove Bit";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=640_6_4_mm_V_Groove_Bit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[3].sImage = "1-640.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[3].nSectionId = "174";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[4].sName = "650 3.2 mm Straight Bit";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=650_3_2_mm_Straight_Bit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[4].sImage = "1-650.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[4].nSectionId = "175";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[5].sName = "652 4.8 mm Straight Bit";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=652_4_8_mm_Straight_Bit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[5].sImage = "1-652.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[5].nSectionId = "176";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[6].sName = "654 6.4 mm Straight Bit";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=654_6_4_mm_Straight_Bit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[6].sImage = "1-654.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[6].nSectionId = "177";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[7].sName = "655 8.0 mm Keyhole Bit";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=655_8_0_mm_Keyhole_Bit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[7].sImage = "1-655.gif";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[7].nSectionId = "178";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[7].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[1].pChild[6].pChild[7].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].sName = "2. Grinding / Sharpening";
section_tree[3].pChild[1].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Grinding.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].sImage = "s-grinding.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].nSectionId = "43";
section_tree[3].pChild[1].pChild[1].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild= new CreateArray(5);
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[1].sName = "1. Aluminium Oxide Grinding Wheels 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Aluminium_Oxide_Abrasive_Wheels_3_2_mm_Shank.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[1].sImage = "1-541.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[1].nSectionId = "44";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].sName = "2. Aluminium Oxide Grinding Stones 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Aluminium_Oxide_Grinding_Stones.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].sImage = "1-aluoxgrind.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].nSectionId = "42";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild= new CreateArray(9);
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[1].sName = "911 11.1 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=911_11_1_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[1].sImage = "1-911.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[1].nSectionId = "179";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[2].sName = "932 9.5 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=932_9_5_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[2].sImage = "1-932.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[2].nSectionId = "180";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[3].sName = "952 9.5 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=952_9_5_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[3].sImage = "1-952.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[3].nSectionId = "181";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[4].sName = "953 6.4 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=953_6_4_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[4].sImage = "1-953.GIF";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[4].nSectionId = "182";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[5].sName = "997 6.4 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=997_6_4_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[5].sImage = "1-997.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[5].nSectionId = "183";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[6].sName = "8153 4.8 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=8153_4_8_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[6].sImage = "1-8153.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[6].nSectionId = "184";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[7].sName = "8175 9.5 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=8175_9_5_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[7].sImage = "1-8175.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[7].nSectionId = "185";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[7].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[7].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[8].sName = "8193 15.9 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[8].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=8193_15_9_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[8].sImage = "1-8193.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[8].nSectionId = "186";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[8].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[8].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[9].sName = "8215 25.4 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[9].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=8215_25_4_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[9].sImage = "1-8215.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[9].nSectionId = "187";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[9].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[2].pChild[9].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].sName = "3. Silicon Carbide Grinding Stones 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Silicon_Carbide_Griding_Stones_3_2_mm_Shank.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].sImage = "1-silicgrind.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].nSectionId = "45";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild= new CreateArray(6);
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[1].sName = "83142 7.0 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=83142_7_0_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[1].sImage = "1-83142.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[1].nSectionId = "188";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[2].sName = "83322 3.2 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=83322_3_2_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[2].sImage = "1-83322.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[2].nSectionId = "189";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[3].sName = "84922 4.8 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=84922_4_8_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[3].sImage = "1-84922.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[3].nSectionId = "191";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[4].sName = "83702 3.2 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=83702_3_2_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[4].sImage = "1-83702.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[4].nSectionId = "190";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[5].sName = "85602 10.3 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=85602_10_3_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[5].sImage = "1-85602.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[5].nSectionId = "192";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[6].sName = "85422 19.8 mm Grinding Stone";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=85422_19_8_mm_Grinding_Stone.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[6].sImage = "1-85422.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[6].nSectionId = "193";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[3].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].sName = "4. Abrasive Points 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=4__Abrasive_Points.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].sImage = "1-abrapoint.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].nSectionId = "105";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild= new CreateArray(2);
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild[1].sName = "516 Abrasive point bullet shaped";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=516_Abrasive_point_bullet_shaped.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild[1].sImage = "1-516.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild[1].nSectionId = "194";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild[2].sName = "518 Abrasive point cylinder shaped";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=518_Abrasive_point_cylinder_shaped.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild[2].sImage = "1-518.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild[2].nSectionId = "195";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[4].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].sName = "5. Chainsaw Sharpening Grinding Stones";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Aluminium_Oxide_Grinding_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].sImage = "1-chain.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].nSectionId = "46";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild= new CreateArray(4);
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[1].sName = "453 4.0 mm Chainsaw Sharpening Grinding Wheel";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=453_4_0_mm_Chainsaw_Sharpening_Grinding_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[1].sImage = "1-453.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[1].nSectionId = "152";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[2].sName = "454 4.8 mm Chainsaw Sharpening Grinding Wheel";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=454_4_8_mm_Chainsaw_Sharpening_Grinding_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[2].sImage = "1-454.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[2].nSectionId = "196";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[3].sName = "455 5.6 mm Chainsaw Sharpening Grinding Wheel";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=455_5_6_mm_Chainsaw_Sharpening_Grinding_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[3].sImage = "1-455.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[3].nSectionId = "197";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[4].sName = "457 4.5 mm Chainsaw Sharpening Grinding Wheel";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=457_4_5_mm_Chainsaw_Sharpening_Grinding_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[4].sImage = "1-457.gif";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[4].nSectionId = "198";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[2].pChild[5].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].sName = "3. Cleaning / Polishing";
section_tree[3].pChild[1].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Cleaning_Polishing.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].sImage = "1-cleaning.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].nSectionId = "49";
section_tree[3].pChild[1].pChild[1].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild= new CreateArray(8);
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].sName = "1. Rubber Polishing Points 2.4 mm";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Rubber_Polishing_Points.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].sImage = "1-rubber.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].nSectionId = "58";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild= new CreateArray(3);
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[1].sName = "461 6.4 mm (Blue) Polishing Point";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=461_6_4_mm__Blue__Polishing_Point.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[1].sImage = "1-461.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[1].nSectionId = "199";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[2].sName = "462 6.4 mm (Blue) Polishing Point";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=462_6_4_mm__Blue__Polishing_Point.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[2].sImage = "1-462.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[2].nSectionId = "200";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[3].sName = "463 6.4 mm (Blue) Polishing Point";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=463_6_4_mm__Blue__Polishing_Point.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[3].sImage = "1-463.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[3].nSectionId = "201";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[1].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].sName = "2. Impregnated Polishing Wheel 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=2__Impregnated_Polishing_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].sImage = "1-impreg.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].nSectionId = "106";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].pChild= new CreateArray(1);
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].pChild[1].sName = "520 Impregnated Polishing Wheel";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=520_Impregnated_Polishing_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].pChild[1].sImage = "1-520.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].pChild[1].nSectionId = "202";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[2].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].sName = "3. Polishing Wheels";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Cleaning_and_Polishing_Accesories.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].sImage = "1-polishwheel.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].nSectionId = "59";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild= new CreateArray(7);
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[1].sName = "414 13.0mm Felt Wheel";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=414_13_0mm_Felt_Wheel__Use_401_.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[1].sImage = "1-414.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[1].nSectionId = "203";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[2].sName = "422 9.5 mm Felt Tip ";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=422_9_5_mm_Felt_Tip__Use_401_.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[2].sImage = "1-422.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[2].nSectionId = "204";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[3].sName = "423 25 mm Cloth Wheel ";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=423_25_4_mm_Cloth_Wheel__Use_402_.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[3].sImage = "1-423.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[3].nSectionId = "205";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[4].sName = "423JA -  SpeedClic™ Cloth Polishing Wheel";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_423JA_-_.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[4].sImage = "sec_423ja.jpg";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[4].nSectionId = "370";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[5].sName = "429 Felt Wheel";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=429_Felt_Wheel__Use_401_.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[5].sImage = "1-429.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[5].nSectionId = "206";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[6].sName = "425 Emery Impregnated Wheel ";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=425_Emery_Impregnated_Wheel__Use_402_.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[6].sImage = "1-425.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[6].nSectionId = "207";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[7].sName = "421 Polishing Compound";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=421_Polishing_Compound.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[7].sImage = "1-421.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[7].nSectionId = "208";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[7].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[3].pChild[7].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].sName = "4. Bristle Brushes 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Bristle_Brushes.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].sImage = "1-bristle.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].nSectionId = "54";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild= new CreateArray(3);
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[1].sName = "403 19.0mm Wheel Shape Bristle Brush";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=403_19_0mm_Wheel_Shape_Bristle_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[1].sImage = "1-403.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[1].nSectionId = "209";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[2].sName = "404 13.0mm Cup Shape Bristle Brush";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=404_13_0mm_Cup_Shape_Bristle_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[2].sImage = "1-404.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[2].nSectionId = "210";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[3].sName = "405 3.2mm End Shape Bristle Brush";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=405_3_2mm_End_Shape_Bristle_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[3].sImage = "1-405.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[3].nSectionId = "211";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[4].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].sName = "5. Carbon Steel Brushes 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Carbon_Wire_Brushes.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].sImage = "1-carbonbrush.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].nSectionId = "55";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild= new CreateArray(3);
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[1].sName = "428 19.0mm Wheel Shaped Steel Brush";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=428_19_0mm_Wheel_Shaped_Steel_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[1].sImage = "1-428.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[1].nSectionId = "212";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[2].sName = "442 13.0mm Cup Shaped Steel Brush";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=442_13_0mm_Cup_Shaped_Steel_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[2].sImage = "1-442.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[2].nSectionId = "213";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[3].sName = "443 3.2mm End Shaped Steel Brush";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=443_3_2mm_End_Shaped_Steel_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[3].sImage = "1-443.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[3].nSectionId = "214";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[5].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[6].sName = "6. High-Performance Abrasive Brush 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=6__High_Performance_Abrasive_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[6].sImage = "1-538.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[6].nSectionId = "107";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].sName = "7. Stainless Steel Brushes 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Stainless_Steel_Brushes.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].sImage = "1-stainbrush.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].nSectionId = "56";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild= new CreateArray(3);
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[1].sName = "530 19.0mm Wheel Shaped S/Steel Brush";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=530_19_0mm_Wheel_Shaped_S_Steel_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[1].sImage = "1-530.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[1].nSectionId = "215";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[2].sName = "531 13.0mm Cup Shaped S/Steel Brush";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=531_13_0mm_Cup_Shaped_S_Steel_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[2].sImage = "1-531.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[2].nSectionId = "216";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[3].sName = "532 3.2mm End Shaped S/Steel Brush";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=532_3_2mm_End_Shaped_S_Steel_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[3].sImage = "1-532.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[3].nSectionId = "217";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[7].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].sName = "8. Brass Brushes 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Brass_Brushes.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].sImage = "1-brassbrush.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].nSectionId = "57";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild= new CreateArray(3);
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[1].sName = "535 19.0mm Wheel Shaped Brass Brush";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=535_19_0mm_Wheel_Shaped_Brass_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[1].sImage = "1-535.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[1].nSectionId = "218";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[2].sName = "536 13.0mm Cup Shaped Brass Brush";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=536_13_0mm_Cup_Shaped_Brass_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[2].sImage = "1-536.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[2].nSectionId = "219";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[3].sName = "537 3.2mm End Shaped Brass Brush";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=537_3_2mm_End_Shaped_Brass_Brush.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[3].sImage = "1-537.gif";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[3].nSectionId = "220";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[3].pChild[8].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].sName = "4. Cutting";
section_tree[3].pChild[1].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Cutting.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].sImage = "1-cutting.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].nSectionId = "48";
section_tree[3].pChild[1].pChild[1].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild= new CreateArray(4);
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].sName = "1. Cut-Off Wheels 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=1__Cut_Off_Wheels.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].sImage = "1-cutoff.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].nSectionId = "108";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild= new CreateArray(7);
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].sName = "Dremel SpeedClic™ System";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_SpeedClic.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].sImage = "1-406JA.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].nSectionId = "270";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild= new CreateArray(9);
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[1].sName = "406JA Dremel SpeedClic™ Starter Kit";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_406JA_Dremel_SpeedClic__Starter_Kit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[1].sImage = "1-406JA_product.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[1].nSectionId = "284";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[2].sName = "426JA - 32mm Dremel SpeedClic™ Cut-off Wheel";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_426JA_-_Set_of_5_32mm_Dremel_SpeedClic__Cut-off_Wh.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[2].sImage = "1-426JA.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[2].nSectionId = "285";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[3].sName = "456JC - 38mm Reinforced SpeedClic™ Cut-off Wheel";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_456JC_-_38MM_REINFORCED_.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[3].sImage = "sec_456jc.jpg";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[3].nSectionId = "361";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[4].sName = "456JD - 38mm Reinforced SpeedClic™ Cut-off Wheel";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_456JD_-_38mm_Reinforced_.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[4].sImage = "sec_456jd.jpg";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[4].nSectionId = "362";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[5].sName = "409JB - 38mm Reinforced SpeedClic™ Thin Cut-off Wheel";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_409JB_-_38mm_Reinforced_.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[5].sImage = "sec_409jb.jpg";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[5].nSectionId = "363";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[6].sName = "476JB - 38mm SpeedClic™ Cut Off Wheels For Plastic";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_476JB_-_.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[6].sImage = "sec_476jb.jpg";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[6].nSectionId = "364";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[7].sName = "544JB - 38mm SpeedClic™ Wood Cutting Wheel";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_544JB_-_38mm_SpeedClic__.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[7].sImage = "sec_544jb.jpg";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[7].nSectionId = "365";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[7].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[7].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[8].sName = "545JB - 38mm SpeedClic™ Diamond Wheel";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[8].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_545JB_-_38mm_SpeedClic__Diamond_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[8].sImage = "sec_545jb.jpg";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[8].nSectionId = "366";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[8].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[8].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[9].sName = "690JA - SpeedClic™ Cutting Set";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[9].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_690JA_-_SpeedClic__Cutting_Set.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[9].sImage = "sec_690ja.jpg";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[9].nSectionId = "367";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[9].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[1].pChild[9].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[2].sName = "409 Diam. 24 mm, 0,64 mm Thick Emery Cut-off Wheel";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=409_Diam__24_mm__0_64_mm_Thick_Emery_Cut_off_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[2].sImage = "1-409.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[2].nSectionId = "221";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[3].sName = "420 24 mm, 1 mm Thick HD Emery Cut-off Wheel";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=420_24_mm__1_mm_Thick_HD_Emery_Cut_off_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[3].sImage = "1-420.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[3].nSectionId = "222";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[4].sName = "540 32 mm,  Cut Off Wheel";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=540_32_mm___Cut_Off_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[4].sImage = "1-540.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[4].nSectionId = "224";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[5].sName = "426 32 mm,1mm Fibreglass Reinforced Cut-off";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=426_32mm__1mm_Thick_Fiberglass.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[5].sImage = "1-426.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[5].nSectionId = "225";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[6].sName = "426B Fibreglass Reinforced Cut-off Wheels Pack";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=426B_Fiberglass_Reinforced_Cut_off_Wheels_Pack.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[6].sImage = "1-426b.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[6].nSectionId = "226";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[7].sName = "456 1 1/2" Cut-Off Wheel";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=456_1_1_2__Cut_Off_Wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[7].sImage = "1-456.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[7].nSectionId = "227";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[7].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[1].pChild[7].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].sName = "2.Saw Blade & Diamond Wheel";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=2__Cutter___Shaper_Wheels.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].sImage = "sec_cutting1.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].nSectionId = "109";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild= new CreateArray(2);
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild[1].sName = "545 Diamond wheel";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=545_Diamond_wheel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild[1].sImage = "1-545.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild[1].nSectionId = "228";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild[2].sName = "546 Rip/Crosscut Blade";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=546_Rip_Crosscut_Blade.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild[2].sImage = "1-546.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild[2].nSectionId = "230";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[2].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].sName = "3. Spiral Cutting Bits 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=3__Cutting_Bits.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].sImage = "1-spiral.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].nSectionId = "110";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild= new CreateArray(3);
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[1].sName = "560 Drywall (plasterboard) Cutting Bit";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=560_Drywall__plasterboard__cutting_Bit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[1].sImage = "1-560.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[1].nSectionId = "231";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[2].sName = "561 Multipurpose Cutting Bit";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=561_Multipurpose_Cutting_Bit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[2].sImage = "1-561.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[2].nSectionId = "232";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[3].sName = "562 Tile Cutting Bit";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=562_Tile_Cutting_Bit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[3].sImage = "1-562.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[3].nSectionId = "233";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[3].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].sName = "4. Grout Removal Bits 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=4__Grout_Removal_Bits.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].sImage = "1-grout.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].nSectionId = "111";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild= new CreateArray(2);
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild[1].sName = "569 Grout removal bit 1.6mm";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=569_Grout_removal_bit_1_6mm.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild[1].sImage = "1-569.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild[1].nSectionId = "234";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild[2].sName = "570 Grout removal bit 3.2mm";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=570_Grout_removal_bit_3_2mm.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild[2].sImage = "1-570.gif";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild[2].nSectionId = "235";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[4].pChild[4].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].sName = "5. Sanding";
section_tree[3].pChild[1].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Sanding.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].sImage = "1-sanding.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].nSectionId = "50";
section_tree[3].pChild[1].pChild[1].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild= new CreateArray(4);
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].sName = "1. Sanding Drums & Bands";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=1__Sanding_Bands_3_2_mm.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].sImage = "1-sandband.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].nSectionId = "112";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild= new CreateArray(9);
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[1].sName = "407 13 mm Sanding Drum";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=407_13_mm__Coarse_60_Grit__3_2_mm.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[1].sImage = "1-407.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[1].nSectionId = "236";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[2].sName = "408 13 mm, Coarse 60 Grit";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=408_13_mm__Coarse_60_Grit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[2].sImage = "1-408.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[2].nSectionId = "237";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[3].sName = "432 13 mm, Fine 120 Grit";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=432_13_mm__Fine_120_Grit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[3].sImage = "1-432.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[3].nSectionId = "240";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[4].sName = "430 6.4 mm Sanding Drum";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=430_6_4_mm__Coarse_60_Grit__3_2_mm_.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[4].sImage = "1-430.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[4].nSectionId = "238";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[5].sName = "431 6.4 mm, Coarse 60 Grit";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=431_6_4_mm__Coarse_60_Grit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[5].sImage = "1-431.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[5].nSectionId = "239";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[6].sName = "438 6.4 mm, Fine 120 Grit";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=438_6_4_mm__Fine_120_Grit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[6].sImage = "1-438.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[6].nSectionId = "241";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[7].sName = "439 9.5 mm Sanding Drum ";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=439_9_5_mm__Coarse_60_Grit__3_4_mm_.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[7].sImage = "1-439.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[7].nSectionId = "242";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[7].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[7].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[8].sName = "440 9.5 mm, Coarse 60 Grit";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[8].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=440_9_5_mm__Coarse_60_Grit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[8].sImage = "1-440.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[8].nSectionId = "243";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[8].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[8].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[9].sName = "444 9.5 mm, Fine 120 Grit";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[9].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=444_9_5_mm__Coarse_120_Grit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[9].sImage = "1-444.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[9].nSectionId = "244";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[9].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[1].pChild[9].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].sName = "2. Flapwheels 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=2__Flapwheels_3_2_mm.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].sImage = "1-flap.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].nSectionId = "113";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild= new CreateArray(2);
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild[1].sName = "502 9.5 mm Flap wheels, 80 Grit";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=502_9_5_mm_Flap_wheels__80_Grit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild[1].sImage = "1-502.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild[1].nSectionId = "245";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild[2].sName = "504 4.8 mm Flap wheels, 80 Grit";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=04_4_8_mm_Flap_wheels__80_Grit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild[2].sImage = "1-504.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild[2].nSectionId = "246";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[2].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].sName = "3. Finishing Abrasive Buffs 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=3__Finishing_Abrasive_Buffs.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].sImage = "1-finish.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].nSectionId = "114";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild= new CreateArray(2);
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild[1].sName = "511JA - SpeedClic™ Abrasive Buffs Coarse & Medium";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_511JA_-_SpeedClic__Abrasive_Buffs_Coarse___Medium.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild[1].sImage = "sec_511ja.jpg";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild[1].nSectionId = "368";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild[2].sName = "512JA - SpeedClic™ Abrasive Buffs Fine";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_512JA_-_SpeedClic__Abrasive_Buffs_Coarse___Medium.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild[2].sImage = "sec_512ja.jpg";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild[2].nSectionId = "369";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[3].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].sName = "4. Sanding Discs 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=4__Sanding_Discs_3_2_mm.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].sImage = "1-sanddisc.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].nSectionId = "115";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild= new CreateArray(3);
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[1].sName = "411 19 mm, Coarse 180 Grit Disc";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=411_19_mm__Coarse_180_Grit_Disc.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[1].sImage = "1-411.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[1].nSectionId = "248";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[2].sName = "412 19 mm, Medium 220 Grit Disc";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=412_19_mm__Medium_220_Grit_Disc.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[2].sImage = "1-412.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[2].nSectionId = "249";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[3].sName = "413 19 mm, Fine 240 Grit Disc";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=413_19_mm__Fine_240_Grit_Disc.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[3].sImage = "1-413.gif";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[3].nSectionId = "250";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[5].pChild[4].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].sName = "6. Collets / Mandrels / Miscellaneous";
section_tree[3].pChild[1].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Miscellanous.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].sImage = "1-collets.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].nSectionId = "52";
section_tree[3].pChild[1].pChild[1].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild= new CreateArray(3);
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].sName = "1. Collets & Multi Chuck";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Collets.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].sImage = "1-collets1.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].nSectionId = "60";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild= new CreateArray(6);
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[1].sName = "480 3.2 mm Collet";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=480_3_2_mm_Collet.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[1].sImage = "1-480.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[1].nSectionId = "251";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[2].sName = "481 2.4 mm Collet";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=481_2_4_mm_Collet.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[2].sImage = "1-481.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[2].nSectionId = "252";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[3].sName = "482 1.6 mm Collet";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=482_1_6_mm_Collet.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[3].sImage = "1-482.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[3].nSectionId = "253";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[4].sName = "483 0.8 mm Collet";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=483_0_8_mm_Collet.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[4].sImage = "1-483.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[4].nSectionId = "254";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[4].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[4].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[5].sName = "4485 Collet Nut Kit";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=4485_Collet_Nut_Kit.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[5].sImage = "1-4485.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[5].nSectionId = "255";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[5].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[5].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[6].sName = "4486 Multi Chuck";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=4486_Multi_Chuck.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[6].sImage = "1-4486.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[6].nSectionId = "256";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[6].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[1].pChild[6].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].sName = "2. Mandrels 3.2 mm";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Mandrels.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].sImage = "1-mandrel.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].nSectionId = "61";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild= new CreateArray(2);
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild[1].sName = "401 Mandrel";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=401_Mandrel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild[1].sImage = "1-401.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild[1].nSectionId = "257";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild[2].sName = "402 Mandrel";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=402_Mandrel.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild[2].sImage = "1-402.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild[2].nSectionId = "223";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[2].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].sName = "3. Drills Bits";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=drills.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].sImage = "1-drillbits.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].nSectionId = "68";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild= new CreateArray(2);
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild[1].sName = "628 Drill Bit HSS - Set of 7pc";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=628_Drill_Bits_HSS___Set_of_7pc.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild[1].sImage = "1-628.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild[1].nSectionId = "258";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild[1].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild[1].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild[2].sName = "636 Drill Bit Wood - Set 4 Pc";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=636_Drill_Bits_Wood_Set.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild[2].sImage = "1-636.gif";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild[2].nSectionId = "259";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild[2].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[6].pChild[3].pChild[2].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[7].sName = "7. Mixed Accessory Sets";
section_tree[3].pChild[1].pChild[1].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Bit_Packs.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[7].sImage = "1-kits.gif";
section_tree[3].pChild[1].pChild[1].pChild[7].nSectionId = "53";
section_tree[3].pChild[1].pChild[1].pChild[7].nImageWidth = "142";
section_tree[3].pChild[1].pChild[1].pChild[7].nImageHeight = "142";
section_tree[3].pChild[1].pChild[1].pChild[8].sName = "8. Safety Goggles";
section_tree[3].pChild[1].pChild[1].pChild[8].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Safety_Goggles.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[1].pChild[8].sImage = "1-SG4JA_1.jpg";
section_tree[3].pChild[1].pChild[1].pChild[8].nSectionId = "276";
section_tree[3].pChild[1].pChild[1].pChild[8].nImageWidth = "143";
section_tree[3].pChild[1].pChild[1].pChild[8].nImageHeight = "143";
section_tree[3].pChild[1].pChild[2].sName = "Multi Shape Sander Accessories";
section_tree[3].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Multi_Shape_Sander_Accessories.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[2].sImage = "S-Multi_shape.jpg";
section_tree[3].pChild[1].pChild[2].nSectionId = "10";
section_tree[3].pChild[1].pChild[2].nImageWidth = "220";
section_tree[3].pChild[1].pChild[2].nImageHeight = "131";
section_tree[3].pChild[1].pChild[2].pChild= new CreateArray(2);
section_tree[3].pChild[1].pChild[2].pChild[1].sName = "Hook & Loop Paper";
section_tree[3].pChild[1].pChild[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Hook___Loop_Paper.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[2].pChild[1].sImage = "S-6060.jpg";
section_tree[3].pChild[1].pChild[2].pChild[1].nSectionId = "129";
section_tree[3].pChild[1].pChild[2].pChild[1].nImageWidth = "102";
section_tree[3].pChild[1].pChild[2].pChild[1].nImageHeight = "149";
section_tree[3].pChild[1].pChild[2].pChild[2].sName = "Sanding Tubes";
section_tree[3].pChild[1].pChild[2].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Sanding_Tubes.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[2].pChild[2].sImage = "S-6050.JPG";
section_tree[3].pChild[1].pChild[2].pChild[2].nSectionId = "130";
section_tree[3].pChild[1].pChild[2].pChild[2].nImageWidth = "111";
section_tree[3].pChild[1].pChild[2].pChild[2].nImageHeight = "149";
section_tree[3].pChild[1].pChild[3].sName = "Moto-Scroller Accessories";
section_tree[3].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Moto_Scroller_Accessories.html&NOLOGIN=1";
section_tree[3].pChild[1].pChild[3].sImage = "S-Moto_scroller.jpg";
section_tree[3].pChild[1].pChild[3].nSectionId = "12";
section_tree[3].pChild[1].pChild[3].nImageWidth = "220";
section_tree[3].pChild[1].pChild[3].nImageHeight = "131";
section_tree[4].sName = "Dremel SpeedClic™ System";
section_tree[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Dremel_SpeedClic.html&NOLOGIN=1";
section_tree[4].sImage = "sec_speedclic.jpg";
section_tree[4].nSectionId = "283";
section_tree[4].nImageWidth = "199";
section_tree[4].nImageHeight = "121";
section_tree[4].pChild= new CreateArray(1);
section_tree[4].pChild[1].sName = "SpeedClic™ Accessories";
section_tree[4].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_SpeedClic__Range.html&NOLOGIN=1";
section_tree[4].pChild[1].sImage = "sec_speedclic1.jpg";
section_tree[4].pChild[1].nSectionId = "350";
section_tree[4].pChild[1].nImageWidth = "665";
section_tree[4].pChild[1].nImageHeight = "410";
section_tree[4].pChild[1].pChild= new CreateArray(10);
section_tree[4].pChild[1].pChild[1].sName = "406JA Dremel SpeedClic™ Starter Kit";
section_tree[4].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=406JA_Dremel_SpeedClic__Starter_Kit.html&NOLOGIN=1";
section_tree[4].pChild[1].pChild[1].sImage = "1-406JA_product.gif";
section_tree[4].pChild[1].pChild[1].nSectionId = "271";
section_tree[4].pChild[1].pChild[1].nImageWidth = "142";
section_tree[4].pChild[1].pChild[1].nImageHeight = "142";
section_tree[4].pChild[1].pChild[2].sName = "456JC - 38mm Reinforced SpeedClic™ Cut-off Wheel";
section_tree[4].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=456JC_-_38MM_REINFORCED_.html&NOLOGIN=1";
section_tree[4].pChild[1].pChild[2].sImage = "sec_456jc.jpg";
section_tree[4].pChild[1].pChild[2].nSectionId = "351";
section_tree[4].pChild[1].pChild[2].nImageWidth = "142";
section_tree[4].pChild[1].pChild[2].nImageHeight = "142";
section_tree[4].pChild[1].pChild[3].sName = "456JD - 38mm Reinforced SpeedClic™ Cut-off Wheel";
section_tree[4].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=456JD_-_38mm_Reinforced_.html&NOLOGIN=1";
section_tree[4].pChild[1].pChild[3].sImage = "sec_456jd.jpg";
section_tree[4].pChild[1].pChild[3].nSectionId = "352";
section_tree[4].pChild[1].pChild[3].nImageWidth = "142";
section_tree[4].pChild[1].pChild[3].nImageHeight = "142";
section_tree[4].pChild[1].pChild[4].sName = "409JB - 38mm Reinforced SpeedClic™ Thin Cut-off Wheel";
section_tree[4].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=409JB_-_38mm_Reinforced_.html&NOLOGIN=1";
section_tree[4].pChild[1].pChild[4].sImage = "sec_409jb.jpg";
section_tree[4].pChild[1].pChild[4].nSectionId = "353";
section_tree[4].pChild[1].pChild[4].nImageWidth = "142";
section_tree[4].pChild[1].pChild[4].nImageHeight = "142";
section_tree[4].pChild[1].pChild[5].sName = "476JB - 38mm SpeedClic™ Cut Off Wheels For Plastic";
section_tree[4].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=476JB_-_.html&NOLOGIN=1";
section_tree[4].pChild[1].pChild[5].sImage = "sec_476jb.jpg";
section_tree[4].pChild[1].pChild[5].nSectionId = "354";
section_tree[4].pChild[1].pChild[5].nImageWidth = "142";
section_tree[4].pChild[1].pChild[5].nImageHeight = "142";
section_tree[4].pChild[1].pChild[6].sName = "544JB - 38mm SpeedClic™ Wood Cutting Wheel";
section_tree[4].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=544JB_-_38mm_SpeedClic__.html&NOLOGIN=1";
section_tree[4].pChild[1].pChild[6].sImage = "sec_544jb.jpg";
section_tree[4].pChild[1].pChild[6].nSectionId = "355";
section_tree[4].pChild[1].pChild[6].nImageWidth = "142";
section_tree[4].pChild[1].pChild[6].nImageHeight = "142";
section_tree[4].pChild[1].pChild[7].sName = "545JB - 38mm SpeedClic™ Diamond Wheel";
section_tree[4].pChild[1].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=545JB_-_38mm_SpeedClic__Diamond_Wheel.html&NOLOGIN=1";
section_tree[4].pChild[1].pChild[7].sImage = "sec_545jb.jpg";
section_tree[4].pChild[1].pChild[7].nSectionId = "356";
section_tree[4].pChild[1].pChild[7].nImageWidth = "142";
section_tree[4].pChild[1].pChild[7].nImageHeight = "142";
section_tree[4].pChild[1].pChild[8].sName = "423JA -  SpeedClic™ Cloth Polishing Wheel";
section_tree[4].pChild[1].pChild[8].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=423JA_-_.html&NOLOGIN=1";
section_tree[4].pChild[1].pChild[8].sImage = "sec_423ja.jpg";
section_tree[4].pChild[1].pChild[8].nSectionId = "358";
section_tree[4].pChild[1].pChild[8].nImageWidth = "142";
section_tree[4].pChild[1].pChild[8].nImageHeight = "142";
section_tree[4].pChild[1].pChild[9].sName = "511JA - SpeedClic™ Abrasive Buffs Coarse & Medium";
section_tree[4].pChild[1].pChild[9].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=511JA_-_SpeedClic__Abrasive_Buffs_Coarse___Medium.html&NOLOGIN=1";
section_tree[4].pChild[1].pChild[9].sImage = "sec_511ja.jpg";
section_tree[4].pChild[1].pChild[9].nSectionId = "359";
section_tree[4].pChild[1].pChild[9].nImageWidth = "142";
section_tree[4].pChild[1].pChild[9].nImageHeight = "142";
section_tree[4].pChild[1].pChild[10].sName = "512JA - SpeedClic™ Abrasive Buffs Fine";
section_tree[4].pChild[1].pChild[10].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=512JA_-_SpeedClic__Abrasive_Buffs_Coarse___Medium.html&NOLOGIN=1";
section_tree[4].pChild[1].pChild[10].sImage = "sec_512ja.jpg";
section_tree[4].pChild[1].pChild[10].nSectionId = "360";
section_tree[4].pChild[1].pChild[10].nImageWidth = "142";
section_tree[4].pChild[1].pChild[10].nImageHeight = "142";
section_tree[5].sName = "Attachments";
section_tree[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Attachments.html&NOLOGIN=1";
section_tree[5].sImage = "attach_sec_new.jpg";
section_tree[5].nSectionId = "99";
section_tree[5].nImageWidth = "175";
section_tree[5].nImageHeight = "121";
section_tree[5].pChild= new CreateArray(1);
section_tree[5].pChild[1].sName = "Attachments";
section_tree[5].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_attachment.html&NOLOGIN=1";
section_tree[5].pChild[1].sImage = "S-Dremel_attach.jpg";
section_tree[5].pChild[1].nSectionId = "8";
section_tree[5].pChild[1].nImageWidth = "350";
section_tree[5].pChild[1].nImageHeight = "245";
section_tree[5].pChild[1].pChild= new CreateArray(6);
section_tree[5].pChild[1].pChild[1].sName = "1. Attachments to Reach";
section_tree[5].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=1__Attachments_to_Reach.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[1].sImage = "1-reach.gif";
section_tree[5].pChild[1].pChild[1].nSectionId = "116";
section_tree[5].pChild[1].pChild[1].nImageWidth = "142";
section_tree[5].pChild[1].pChild[1].nImageHeight = "142";
section_tree[5].pChild[1].pChild[1].pChild= new CreateArray(2);
section_tree[5].pChild[1].pChild[1].pChild[1].sName = "Dremel Flexible Shaft - 225";
section_tree[5].pChild[1].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Flex_Shaft.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[1].pChild[1].sImage = "1-225.gif";
section_tree[5].pChild[1].pChild[1].pChild[1].nSectionId = "32";
section_tree[5].pChild[1].pChild[1].pChild[1].nImageWidth = "142";
section_tree[5].pChild[1].pChild[1].pChild[1].nImageHeight = "142";
section_tree[5].pChild[1].pChild[1].pChild[2].sName = "Dremel Right Angle Attachment - 575";
section_tree[5].pChild[1].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Right_Angle_Attachment.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[1].pChild[2].sImage = "1-575.gif";
section_tree[5].pChild[1].pChild[1].pChild[2].nSectionId = "29";
section_tree[5].pChild[1].pChild[1].pChild[2].nImageWidth = "142";
section_tree[5].pChild[1].pChild[1].pChild[2].nImageHeight = "142";
section_tree[5].pChild[1].pChild[2].sName = "2. Attachments to Rout";
section_tree[5].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=2__Attachments_to_Rout.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[2].sImage = "1-rout.gif";
section_tree[5].pChild[1].pChild[2].nSectionId = "117";
section_tree[5].pChild[1].pChild[2].nImageWidth = "142";
section_tree[5].pChild[1].pChild[2].nImageHeight = "142";
section_tree[5].pChild[1].pChild[2].pChild= new CreateArray(2);
section_tree[5].pChild[1].pChild[2].pChild[1].sName = "Dremel Plunge Router Attachment - 335";
section_tree[5].pChild[1].pChild[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_router.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[2].pChild[1].sImage = "1-335.gif";
section_tree[5].pChild[1].pChild[2].pChild[1].nSectionId = "38";
section_tree[5].pChild[1].pChild[2].pChild[1].nImageWidth = "142";
section_tree[5].pChild[1].pChild[2].pChild[1].nImageHeight = "142";
section_tree[5].pChild[1].pChild[2].pChild[2].sName = "Dremel Shaper / Router Table - 231";
section_tree[5].pChild[1].pChild[2].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Router_Table.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[2].pChild[2].sImage = "1-231.gif";
section_tree[5].pChild[1].pChild[2].pChild[2].nSectionId = "39";
section_tree[5].pChild[1].pChild[2].pChild[2].nImageWidth = "142";
section_tree[5].pChild[1].pChild[2].pChild[2].nImageHeight = "142";
section_tree[5].pChild[1].pChild[3].sName = "3. Attachments to Sharpen";
section_tree[5].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=3__Attachments_to_Sharpen.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[3].sImage = "1-sharpen.gif";
section_tree[5].pChild[1].pChild[3].nSectionId = "118";
section_tree[5].pChild[1].pChild[3].nImageWidth = "142";
section_tree[5].pChild[1].pChild[3].nImageHeight = "142";
section_tree[5].pChild[1].pChild[3].pChild= new CreateArray(1);
section_tree[5].pChild[1].pChild[3].pChild[1].sName = "Dremel Chainsaw Shapening Attachment - 1453";
section_tree[5].pChild[1].pChild[3].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Chain_Saw_Shapening.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[3].pChild[1].sImage = "1-1453.gif";
section_tree[5].pChild[1].pChild[3].pChild[1].nSectionId = "31";
section_tree[5].pChild[1].pChild[3].pChild[1].nImageWidth = "142";
section_tree[5].pChild[1].pChild[3].pChild[1].nImageHeight = "142";
section_tree[5].pChild[1].pChild[4].sName = "4. Attachmens to Cut";
section_tree[5].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=4__Attachmens_to_Cut.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[4].sImage = "1-cut.gif";
section_tree[5].pChild[1].pChild[4].nSectionId = "119";
section_tree[5].pChild[1].pChild[4].nImageWidth = "142";
section_tree[5].pChild[1].pChild[4].nImageHeight = "142";
section_tree[5].pChild[1].pChild[4].pChild= new CreateArray(5);
section_tree[5].pChild[1].pChild[4].pChild[1].sName = "Dremel Multi-Purpose Cutting Kit - 565";
section_tree[5].pChild[1].pChild[4].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Cutting_Kit.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[4].pChild[1].sImage = "1-565.gif";
section_tree[5].pChild[1].pChild[4].pChild[1].nSectionId = "26";
section_tree[5].pChild[1].pChild[4].pChild[1].nImageWidth = "142";
section_tree[5].pChild[1].pChild[4].pChild[1].nImageHeight = "142";
section_tree[5].pChild[1].pChild[4].pChild[2].sName = "Dremel Wall & Floor Grout Removal Kit - 568";
section_tree[5].pChild[1].pChild[4].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Grout_removal_attachment.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[4].pChild[2].sImage = "1-568.gif";
section_tree[5].pChild[1].pChild[4].pChild[2].nSectionId = "28";
section_tree[5].pChild[1].pChild[4].pChild[2].nImageWidth = "142";
section_tree[5].pChild[1].pChild[4].pChild[2].nImageHeight = "142";
section_tree[5].pChild[1].pChild[4].pChild[3].sName = "Dremel Wall Tile Cutting Kit - 566";
section_tree[5].pChild[1].pChild[4].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Tile.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[4].pChild[3].sImage = "1-566.gif";
section_tree[5].pChild[1].pChild[4].pChild[3].nSectionId = "27";
section_tree[5].pChild[1].pChild[4].pChild[3].nImageWidth = "142";
section_tree[5].pChild[1].pChild[4].pChild[3].nImageHeight = "142";
section_tree[5].pChild[1].pChild[4].pChild[4].sName = "Dremel Line & Circle Cutter - 678";
section_tree[5].pChild[1].pChild[4].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Line___Circle_Cutter.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[4].pChild[4].sImage = "1-678.gif";
section_tree[5].pChild[1].pChild[4].pChild[4].nSectionId = "349";
section_tree[5].pChild[1].pChild[4].pChild[4].nImageWidth = "142";
section_tree[5].pChild[1].pChild[4].pChild[4].nImageHeight = "142";
section_tree[5].pChild[1].pChild[4].pChild[5].sName = "Dremel Mini Saw Attachment - 670";
section_tree[5].pChild[1].pChild[4].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Dremel_Mini_Saw.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[4].pChild[5].sImage = "1-670a.GIF";
section_tree[5].pChild[1].pChild[4].pChild[5].nSectionId = "124";
section_tree[5].pChild[1].pChild[4].pChild[5].nImageWidth = "142";
section_tree[5].pChild[1].pChild[4].pChild[5].nImageHeight = "142";
section_tree[5].pChild[1].pChild[5].sName = "5. Attachments to Control";
section_tree[5].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=5__Attachments_to_Control.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[5].sImage = "1-control.gif";
section_tree[5].pChild[1].pChild[5].nSectionId = "120";
section_tree[5].pChild[1].pChild[5].nImageWidth = "142";
section_tree[5].pChild[1].pChild[5].nImageHeight = "142";
section_tree[5].pChild[1].pChild[5].pChild= new CreateArray(4);
section_tree[5].pChild[1].pChild[5].pChild[1].sName = "Multi-Vice 3 in 1";
section_tree[5].pChild[1].pChild[5].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Multi_Vice.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[5].pChild[1].sImage = "MULTIVICE1.jpg";
section_tree[5].pChild[1].pChild[5].pChild[1].nSectionId = "304";
section_tree[5].pChild[1].pChild[5].pChild[1].nImageWidth = "147";
section_tree[5].pChild[1].pChild[5].pChild[1].nImageHeight = "148";
section_tree[5].pChild[1].pChild[5].pChild[2].sName = "Dremel Workstation - 220";
section_tree[5].pChild[1].pChild[5].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_drill_stand.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[5].pChild[2].sImage = "1-220.gif";
section_tree[5].pChild[1].pChild[5].pChild[2].nSectionId = "41";
section_tree[5].pChild[1].pChild[5].pChild[2].nImageWidth = "142";
section_tree[5].pChild[1].pChild[5].pChild[2].nImageHeight = "142";
section_tree[5].pChild[1].pChild[5].pChild[3].sName = "Dremel Flexi Shaft Tool - 2222";
section_tree[5].pChild[1].pChild[5].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Tool_Stand.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[5].pChild[3].sImage = "1-2222.gif";
section_tree[5].pChild[1].pChild[5].pChild[3].nSectionId = "40";
section_tree[5].pChild[1].pChild[5].pChild[3].nImageWidth = "142";
section_tree[5].pChild[1].pChild[5].pChild[3].nImageHeight = "142";
section_tree[5].pChild[1].pChild[5].pChild[4].sName = "DREMELite - DL4";
section_tree[5].pChild[1].pChild[5].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=DREMELite___DL4.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[5].pChild[4].sImage = "1-dl4.gif";
section_tree[5].pChild[1].pChild[5].pChild[4].nSectionId = "268";
section_tree[5].pChild[1].pChild[5].pChild[4].nImageWidth = "142";
section_tree[5].pChild[1].pChild[5].pChild[4].nImageHeight = "142";
section_tree[5].pChild[1].pChild[6].sName = "6. Attachments to Saw";
section_tree[5].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=6__Attachments_to_Saw.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[6].sImage = "1-670.gif";
section_tree[5].pChild[1].pChild[6].nSectionId = "121";
section_tree[5].pChild[1].pChild[6].nImageWidth = "142";
section_tree[5].pChild[1].pChild[6].nImageHeight = "142";
section_tree[5].pChild[1].pChild[6].pChild= new CreateArray(1);
section_tree[5].pChild[1].pChild[6].pChild[1].sName = "Dremel Mini Saw Attachment";
section_tree[5].pChild[1].pChild[6].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Mini_Saw.html&NOLOGIN=1";
section_tree[5].pChild[1].pChild[6].pChild[1].sImage = "1-670b.GIF";
section_tree[5].pChild[1].pChild[6].pChild[1].nSectionId = "17";
section_tree[5].pChild[1].pChild[6].pChild[1].nImageWidth = "142";
section_tree[5].pChild[1].pChild[6].pChild[1].nImageHeight = "142";
section_tree[6].sName = "Clamping & Holding";
section_tree[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Clamping_and_Holding.html&NOLOGIN=1";
section_tree[6].sImage = "sec_table.jpg";
section_tree[6].nSectionId = "333";
section_tree[6].nImageWidth = "182";
section_tree[6].nImageHeight = "121";
section_tree[6].pChild= new CreateArray(1);
section_tree[6].pChild[1].sName = "Clamping & Workpiece Holding";
section_tree[6].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Clamping_and_Workpiece_Holding.html&NOLOGIN=1";
section_tree[6].pChild[1].sImage = "sec_clamps.jpg";
section_tree[6].pChild[1].nSectionId = "334";
section_tree[6].pChild[1].nImageWidth = "350";
section_tree[6].pChild[1].nImageHeight = "204";
section_tree[6].pChild[1].pChild= new CreateArray(6);
section_tree[6].pChild[1].pChild[1].sName = "Project Table";
section_tree[6].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Project_Table.html&NOLOGIN=1";
section_tree[6].pChild[1].pChild[1].sImage = "sec_table1.jpg";
section_tree[6].pChild[1].pChild[1].nSectionId = "336";
section_tree[6].pChild[1].pChild[1].nImageWidth = "147";
section_tree[6].pChild[1].pChild[1].nImageHeight = "147";
section_tree[6].pChild[1].pChild[2].sName = "Bar Clamps (2)";
section_tree[6].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=BAR_CLAMPS__2_.html&NOLOGIN=1";
section_tree[6].pChild[1].pChild[2].sImage = "sec_bar_clamp.jpg";
section_tree[6].pChild[1].pChild[2].nSectionId = "337";
section_tree[6].pChild[1].pChild[2].nImageWidth = "147";
section_tree[6].pChild[1].pChild[2].nImageHeight = "147";
section_tree[6].pChild[1].pChild[3].sName = "Ratchet Clamp Large";
section_tree[6].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Ratchet_Clamp_Large.html&NOLOGIN=1";
section_tree[6].pChild[1].pChild[3].sImage = "sec_ratclamp50.jpg";
section_tree[6].pChild[1].pChild[3].nSectionId = "339";
section_tree[6].pChild[1].pChild[3].nImageWidth = "147";
section_tree[6].pChild[1].pChild[3].nImageHeight = "147";
section_tree[6].pChild[1].pChild[4].sName = "Mini Ratchet Clamps (2)";
section_tree[6].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Mini_Ratchet_Clamps__2_.html&NOLOGIN=1";
section_tree[6].pChild[1].pChild[4].sImage = "sec_ratclamp.jpg";
section_tree[6].pChild[1].pChild[4].nSectionId = "338";
section_tree[6].pChild[1].pChild[4].nImageWidth = "147";
section_tree[6].pChild[1].pChild[4].nImageHeight = "147";
section_tree[6].pChild[1].pChild[5].sName = "Multi-Vice 3 in 1";
section_tree[6].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Multi_Vice.html&NOLOGIN=1";
section_tree[6].pChild[1].pChild[5].sImage = "MULTIVICE1.jpg";
section_tree[6].pChild[1].pChild[5].nSectionId = "335";
section_tree[6].pChild[1].pChild[5].nImageWidth = "147";
section_tree[6].pChild[1].pChild[5].nImageHeight = "148";
section_tree[6].pChild[1].pChild[6].sName = "Dremel Workstation - 220";
section_tree[6].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Dremel_drill_stand.html&NOLOGIN=1";
section_tree[6].pChild[1].pChild[6].sImage = "sec_220.jpg";
section_tree[6].pChild[1].pChild[6].nSectionId = "340";
section_tree[6].pChild[1].pChild[6].nImageWidth = "147";
section_tree[6].pChild[1].pChild[6].nImageHeight = "147";
section_tree[7].sName = "Service Spares Batteries";
section_tree[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Service_new.html&NOLOGIN=1";
section_tree[7].sImage = "service_sec_new.JPG";
section_tree[7].nSectionId = "100";
section_tree[7].nImageWidth = "175";
section_tree[7].nImageHeight = "121";
section_tree[7].pChild= new CreateArray(2);
section_tree[7].pChild[1].sName = "Battery Packs";
section_tree[7].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=battery_pack.html&NOLOGIN=1";
section_tree[7].pChild[1].sImage = "1-battery.gif";
section_tree[7].pChild[1].nSectionId = "23";
section_tree[7].pChild[1].nImageWidth = "142";
section_tree[7].pChild[1].nImageHeight = "142";
section_tree[7].pChild[2].sName = "Service Centre";
section_tree[7].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=service.html&NOLOGIN=1";
section_tree[7].pChild[2].sImage = "Service1.GIF";
section_tree[7].pChild[2].nSectionId = "25";
section_tree[7].pChild[2].nImageWidth = "164";
section_tree[7].pChild[2].nImageHeight = "142";
section_tree[7].pChild[2].pChild= new CreateArray(1);
section_tree[7].pChild[2].pChild[1].sName = "HobbyTools-Direct.com";
section_tree[7].pChild[2].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Hobby.html&NOLOGIN=1";
section_tree[7].pChild[2].pChild[1].sImage = "_white.gif";
section_tree[7].pChild[2].pChild[1].nSectionId = "291";
section_tree[7].pChild[2].pChild[1].nImageWidth = "10";
section_tree[7].pChild[2].pChild[1].nImageHeight = "10";
section_tree[8].sName = "What's New";
section_tree[8].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=What_s_New.html&NOLOGIN=1";
section_tree[8].sImage = "new_sec_new.jpg";
section_tree[8].nSectionId = "277";
section_tree[8].nImageWidth = "175";
section_tree[8].nImageHeight = "121";
section_tree[8].pChild= new CreateArray(1);
section_tree[8].pChild[1].sName = "New Products";
section_tree[8].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=New_Products.html&NOLOGIN=1";
section_tree[8].pChild[1].sImage = "";
section_tree[8].pChild[1].nSectionId = "287";
section_tree[8].pChild[1].nImageWidth = "175";
section_tree[8].pChild[1].nImageHeight = "121";
section_tree[8].pChild[1].pChild= new CreateArray(9);
section_tree[8].pChild[1].pChild[1].sName = "Dremel 4000 Series";
section_tree[8].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Dremel_4000_Series.html&NOLOGIN=1";
section_tree[8].pChild[1].pChild[1].sImage = "1-4000sec.gif";
section_tree[8].pChild[1].pChild[1].nSectionId = "83";
section_tree[8].pChild[1].pChild[1].nImageWidth = "270";
section_tree[8].pChild[1].pChild[1].nImageHeight = "150";
section_tree[8].pChild[1].pChild[1].pChild= new CreateArray(2);
section_tree[8].pChild[1].pChild[1].pChild[1].sName = "4000 Series + 45 Accessories";
section_tree[8].pChild[1].pChild[1].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_4000_Series___45_Accessories.html&NOLOGIN=1";
section_tree[8].pChild[1].pChild[1].pChild[1].sImage = "s-4000jb.jpg";
section_tree[8].pChild[1].pChild[1].pChild[1].nSectionId = "84";
section_tree[8].pChild[1].pChild[1].pChild[1].nImageWidth = "168";
section_tree[8].pChild[1].pChild[1].pChild[1].nImageHeight = "158";
section_tree[8].pChild[1].pChild[1].pChild[2].sName = "4000 Series + 65 Accessories";
section_tree[8].pChild[1].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_4000_Series___65_Accessories.html&NOLOGIN=1";
section_tree[8].pChild[1].pChild[1].pChild[2].sImage = "s-4000je.jpg";
section_tree[8].pChild[1].pChild[1].pChild[2].nSectionId = "85";
section_tree[8].pChild[1].pChild[1].pChild[2].nImageWidth = "168";
section_tree[8].pChild[1].pChild[1].pChild[2].nImageHeight = "158";
section_tree[8].pChild[1].pChild[2].sName = "Dremel 9100 Fortiflex";
section_tree[8].pChild[1].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Dremel_9100_Fortiflex.html&NOLOGIN=1";
section_tree[8].pChild[1].pChild[2].sImage = "1-9100.gif";
section_tree[8].pChild[1].pChild[2].nSectionId = "15";
section_tree[8].pChild[1].pChild[2].nImageWidth = "271";
section_tree[8].pChild[1].pChild[2].nImageHeight = "150";
section_tree[8].pChild[1].pChild[3].sName = "Dremel 300 Hobby Table Kit";
section_tree[8].pChild[1].pChild[3].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Hobby_Table.html&NOLOGIN=1";
section_tree[8].pChild[1].pChild[3].sImage = "s-hobbynew.jpg";
section_tree[8].pChild[1].pChild[3].nSectionId = "66";
section_tree[8].pChild[1].pChild[3].nImageWidth = "271";
section_tree[8].pChild[1].pChild[3].nImageHeight = "150";
section_tree[8].pChild[1].pChild[4].sName = "Dremel 300 Tool in a Tube";
section_tree[8].pChild[1].pChild[4].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_300_Tool_in_a_Tube.html&NOLOGIN=1";
section_tree[8].pChild[1].pChild[4].sImage = "s-tubenew.jpg";
section_tree[8].pChild[1].pChild[4].nSectionId = "71";
section_tree[8].pChild[1].pChild[4].nImageWidth = "271";
section_tree[8].pChild[1].pChild[4].nImageHeight = "150";
section_tree[8].pChild[1].pChild[5].sName = "Dremel Driver 7.2v";
section_tree[8].pChild[1].pChild[5].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Dremel_Driver_7.2v.html&NOLOGIN=1";
section_tree[8].pChild[1].pChild[5].sImage = "1-1120.gif";
section_tree[8].pChild[1].pChild[5].nSectionId = "344";
section_tree[8].pChild[1].pChild[5].nImageWidth = "271";
section_tree[8].pChild[1].pChild[5].nImageHeight = "150";
section_tree[8].pChild[1].pChild[6].sName = "Dremel Stylus Lithium-Ion";
section_tree[8].pChild[1].pChild[6].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Dremel_Cordless_.html&NOLOGIN=1";
section_tree[8].pChild[1].pChild[6].sImage = "1-002a.gif";
section_tree[8].pChild[1].pChild[6].nSectionId = "279";
section_tree[8].pChild[1].pChild[6].nImageWidth = "271";
section_tree[8].pChild[1].pChild[6].nImageHeight = "150";
section_tree[8].pChild[1].pChild[7].sName = "Dremel Engraver";
section_tree[8].pChild[1].pChild[7].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Dremel_Engraver.html&NOLOGIN=1";
section_tree[8].pChild[1].pChild[7].sImage = "1-003.gif";
section_tree[8].pChild[1].pChild[7].nSectionId = "297";
section_tree[8].pChild[1].pChild[7].nImageWidth = "271";
section_tree[8].pChild[1].pChild[7].nImageHeight = "150";
section_tree[8].pChild[1].pChild[8].sName = "Dremel VersaFlame";
section_tree[8].pChild[1].pChild[8].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=copy_of_Dremel_VersaFlame.html&NOLOGIN=1";
section_tree[8].pChild[1].pChild[8].sImage = "s-versa.jpg";
section_tree[8].pChild[1].pChild[8].nSectionId = "331";
section_tree[8].pChild[1].pChild[8].nImageWidth = "271";
section_tree[8].pChild[1].pChild[8].nImageHeight = "150";
section_tree[8].pChild[1].pChild[9].sName = "Dremel Versatip";
section_tree[8].pChild[1].pChild[9].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Dremel_Multitip.html&NOLOGIN=1";
section_tree[8].pChild[1].pChild[9].sImage = "1-MultiTip.gif";
section_tree[8].pChild[1].pChild[9].nSectionId = "315";
section_tree[8].pChild[1].pChild[9].nImageWidth = "271";
section_tree[8].pChild[1].pChild[9].nImageHeight = "150";
section_tree[9].sName = "Video Demo's & Projects";
section_tree[9].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Video_Demo_&_Projects.html&NOLOGIN=1";
section_tree[9].sImage = "vid_sec_new.jpg";
section_tree[9].nSectionId = "278";
section_tree[9].nImageWidth = "175";
section_tree[9].nImageHeight = "121";
section_tree[9].pChild= new CreateArray(2);
section_tree[9].pChild[1].sName = "Projects Page";
section_tree[9].pChild[1].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Projects_Page.html&NOLOGIN=1";
section_tree[9].pChild[1].sImage = "proj_sec_new.jpg";
section_tree[9].pChild[1].nSectionId = "290";
section_tree[9].pChild[1].nImageWidth = "175";
section_tree[9].pChild[1].nImageHeight = "121";
section_tree[9].pChild[2].sName = "Video Demonstrations";
section_tree[9].pChild[2].sURL = "http://www.dremel-direct.com/cgi-bin/ss000002.pl?SECTIONID=Video_Demonstrations.html&NOLOGIN=1";
section_tree[9].pChild[2].sImage = "";
section_tree[9].pChild[2].nSectionId = "289";
section_tree[9].pChild[2].nImageWidth = "175";
section_tree[9].pChild[2].nImageHeight = "121";