Gradient fillGradient fill
Dremel Direct
Site MapContact UsTerms & Conds

spacer image
 
View Basket
Checkout
Items:, Value:
Store Departments
Main store pages
Home
Catalog
Login
 
spacer image

HobbyTools-Direct.com

Spanner for Collet Nut Spanner for Collet Nut Ref: 2610930692

Spanner to suit collet nut on Dremel tools.

Handle has screwdriver end for 402 mandrel screw. 


Price: £1.39 (Including VAT at 17.5%)

Quantity:  

Clutch Unit Clutch Unit Ref: 2615294309
Clutch Unit 2615294309

The splined rubberised sleeve that connects the motor to the front drive shaft.

Fits models 276, some types of 395 and some types of 396. 


Price: £3.69 (Including VAT at 17.5%)

Quantity:  

Carbon Brush Set for Model 275, 285, 300 & 395 Carbon Brush Set for Model 275, 285, 300 & 395 Ref: 2615298790

Motor brushes go under the brush cap and rest on the armature, providing the electrical connection to keep the tool running. These easily replaceable spares also help extend the life of the tool.

You should check both motor brushes after every 50-60 hours of use. Simply unplug the tool, open the brush caps and remove the carbon piece from the holder. If there is less than 3.2mm of carbon left on either brush, they both should be replaced.

We offer a variety of motor brushes, but you should only use the motor brush that is compatible with your tool. Two motor brushes are included in each pack. 


Price: £6.25 (Including VAT at 17.5%)

Quantity:  

Carbon Brush Set for Model 398 / 400 Carbon Brush Set for Model 398 / 400 Ref: 2610907940
They go under the brush cap and rest on the armature, providing the electrical connection to keep the tool running. These easily replaceable accessories also help extend the life of the tool.

You should check both motor brushes after every 50-60 hours of use. Simply unplug the tool, open the brush caps and remove the carbon piece from the holder. If there is less than 3.2mm of carbon left on either brush, they both should be replaced.

We offer a variety of motor brushes, but you should only use the motor brush that is compatible with your tool. Two motor brushes are included in each pack. 


Price: £7.60 (Including VAT at 17.5%)

Quantity:  

Switch Unit For Dremel 395 Models Switch Unit For Dremel 395 Models Ref: 2615298786
Replacement Switch Unit For Dremel 395 Models

Suitable for 220/240 volt tools only. 


Price: £16.43 (Including VAT at 17.5%)

Quantity:  

Switch Unit For Dremel 300 Models Switch Unit For Dremel 300 Models Ref: 2610925774
Replacement switch unit for the 300 series.

Suitable for 220/240 volt tools only. 


Price: £16.43 (Including VAT at 17.5%)

Quantity:  

8000 Charger (856JD) 8000 Charger (856JD) Ref: 2610920898

Battery charger for 800 / 8000 10.8 volt lithium ion.

Model No. 856JD
Input: 230-240v 50-60hz 10w
Output 12.6v 0.375A
 


Price: £23.99 (Including VAT at 17.5%)

Quantity:  

8000 Motor Assembly 8000 Motor Assembly Ref: 2610919750

Motor assembly for 800 / 8000 lithium ion 10.8 volt.

Motor and drive spindle come pre-assembled - they are not available separately. 


Price: £12.77 (Including VAT at 17.5%)

Quantity:  

800 - 8000 Speed Control 10.8v 800 - 8000 Speed Control 10.8v Ref: 2610919742
Printed Circuit Board 10.8v Lithium Ion speed controller.
For 800 series and 8000 series Lithium Ion Cordless 10.8v 


Price: £26.77 (Including VAT at 17.5%)

Quantity:  

Hex Nut 2610916116 Hex Nut 2610916116 Ref: 2610916116

Hex Nut Adaptor with Square Centre Hole
Used to drive the 225 Flex Shaft, 575 Right Angle Attachment and the 670 Mini Saw
 


Price: £3.70 (Including VAT at 17.5%)

Quantity:  

Dremel-direct offer both a postal repair service and a spare parts order service for most UK specification Dremel tools.

If the parts you require are not listed within this section please contact us giving us information about the model number (usually printed on the tool casing) and/or the parts you require

spacer image